How to adjust the die cutting point of automatic hot stamping machine
When the automatic hot stamping machine is first used, it is necessary to clarify the specific purpose. The main purpose is to formulate specific production operations and control methods. In this way, for the majority of operators, when performing operations, they can operate in strict accordance with specific methods, thereby ensuring the overall operation effect. The automatic hot stamping machine will adjust the die cutting point in use, so how to adjust the die cutting point of the automatic hot stamping machine, and many incorrect operation processes of the automatic hot stamping machine will have different degrees of influence on the product, so it is necessary to Explain to all operators to train really correct operation method and improve product quality.
- The work of the module has been completed. It will cut the plastic film material, then feed the cutting tool into the material and push the cutting area forward.
- Press the die cutting switch of the auto hot stamping machine with both hands respectively. After the die cutting material starts, stop the auto hot stamping machine of the pressing roller before automatically returning to the position.
- If it is found that the material is not completely cut during the stamping process, adjust the cutting depth controller. The automatic hot stamping machine will rotate the “press” system clockwise in the twist direction. If the plastic film is moulded too deeply by the knife, it “presses the system” to adjust the depth of cut counterclockwise in an attempt to press the mould slightly into a date.
- The auto hot stamping machine will pull the cutting area of the feed plate to remove the material, thus completing the die cutting plane stamping process. The method of automatic hot stamping machine is mainly used for continuous feeding, i.e. there is always some overlap between the front and back sheets. This means smooth and fast, but adjusting positioning quickly has a big impact.
The ideal die cutting speed of the automatic hot stamping machine should ensure synchronization and the moving speed of the feeding table should be as low as possible. Second, the automatic hot stamping machine chain guides the positioning and control direction of the chain role and the thickness of the rail to the right side of the segment that can be embedded in the chain.
