Die Punching Machine Necessary For Carton Factory
Die punching machine uses steel knives (knife stencils), metal dies, steel wires (or stencils carved from steel plates), and applies certain pressure through the embossing plate to roll the printed products or cardboard into a certain shape.
The die punching machine is mainly used for die cutting (full cut, half cut) of cardboard, corrugated cardboard, plastic sheet, leather, cork, self-adhesive, EVA, double sided tape, electronics, etc. important equipment.
Lukes Machinery ML series die punching machine structure features:
1. The castings are made of HT250 gray cast iron, and then annealed so that the castings (including the fuselage, press frame, etc.) are not easily deformed and broken.
2. The main shaft is made of four phosphorus-chromium steel, which has been quenched and tempered to improve the strength, rigidity and hardness of the main shaft to achieve the effect of not being easily deformed.
3. The main gears are made of tetraphosphochrome steel, which has been quenched and tempered.
4. The guide rail lining of the die punching machine is made of 38 chrome molybdenum aluminum, which has been nitrided to enhance the hardness and is not easy to wear, so that the upper and lower pressures of the machine can be kept balanced and stable for a long time.
5. The single plate electromagnetic clutch is sensitive and reliable.
6. Continuous pressing and opening delay function, the delay range can be adjusted at will.
7. The transmission link (pull arm) is made of ductile iron, which has high strength and toughness and strong tensile strength.
8. The lubrication system with centralized refueling and manual refueling (optional) can better ensure the smooth flow of the oil circuit, and the maintenance of the lubrication system is more convenient.
9. The shaft sleeve of the transmission part adopts composite copper sleeve (to ensure lubrication), and the connecting rod is made of pure copper copper sleeve. Make the machine more precise.
10. Hand patted triangle limit switch, emergency stop switch, hand push rod limit switch, and three safety devices to ensure safety.
11. It can be installed inside outside movable plate frame and plate (the standard is an external movable plate frame)
